DB Assignment

地址 名称 数据类型 初始值 含义
计数模式

测量模式
0.0 AR1_BUFFER DWORD DW#16#0 AR1 buffer AR1 buffer
4.0 FP BYTE B#16#0 Flag byte Flag byte
6.0 MOD_ADR WORD W#16#0 Module address Module address
8.0 CH_ADR DWORD DW#16#0 Channel address Channel address
12.0 U_D_LGTH BYTE B#16#0 User data length User data length
14.0 LOAD_VAL DINT L#0 New load value (write user) Lower limit (write user)
18.0 CMP_V1 DINT L#0 New comparison value 1 (write user) Upper limit (write user)
22.0 CMP_V2 DINT L#0 New comparison value 2 (write user) Update time(write user)
27.0 ENSET_UP BOOL FALSE Enable setting in up
direction (write user)		 －
27.1 ENSET_DN BOOL FALSE Enable setting in down
direction (write user)		 －
28.0 CTRL_DO0 BOOL FALSE Monitor digital output
DO0 (write user)
28.1 CTRL_DO1 BOOL FALSE Monitor digital output
DO1 (write user)
30.0 LATCH_LOAD DINT L#0 Current load or latch
value (read user)
 Current measured
value (read user)
34.0 ACT_CNTV DINT L#0 Current count value (read user) Current count value (read user)
38.0 DA_ERR_W WORD W#16#0 Data error word (read user) Data error word (read user)
40.0 OT_ERR_B BYTE B#16#0 Operation error byte (read user) Operation error byte (read user)
41.4 DATA_ERR BOOL FALSE Data error bit (read user) Data error bit (read user)
41.7 PARA BOOL FALSE Module parameterized (read user) Module parameterized (read user)
42.0 E_BYTE_0 BYTE B#16#0 Reserved Reserved
43.0 STS_RUN BOOL FALSE Status counter working Status counter working
43.1 STS_DIR BOOL FALSE Status count direction (read user) Status count direction (read user)
43.2 STS_ZERO BOOL FALSE Status zero pass (read user) Full scale (read user)
43.3 STS_OFLW BOOL FALSE Status overflow (read user) Status overflow (read user)
43.4 STS_UFLW BOOL FALSE Status underflow (read user) Status underflow (read user)
43.5 STS_SYNC BOOL FALSE Status counter synchronized (read user) –
43.6 STS_GATE BOOL FALSE Status internal gate (read user) Status internal gate (read user)
43.7 STS_SW_G BOOL FALSE Status software gate (read user) Status software gate (read user)
44.0 STS_SET BOOL FALSE Status digital input SET (read user) Status digital input SET (read user)
44.1 STS_LATCH BOOL FALSE New latch value (only in clock synchronous mode) –
44.2 STS_STA BOOL FALSE Status digital input START (read user) Status digital input START (read user)
44.3 STS_STP BOOL FALSE Status digital input STOP (read user) Status digital input STOP (read user)
44.4 STS_CMP1 BOOL FALSE Status output comparison value 1 (read user) Status output comparison value 1 (read user)
44.5 STS_CMP2 BOOL FALSE Status output comparison value 2 (read user) Status output comparison value 2 (read user)
44.6 STS_COMP1 BOOL FALSE Stored status of comparator 1 –
44.7 STS_COMP1 BOOL FALSE Stored status of comparator 1 –
The following diagnostics data are entered by the FC DIAG_INF
54.0 MDL_DEFECT BOOL FALSE Module error Module error
54.1 INT_FAULT BOOL FALSE Internal fault Internal fault
54.2 EXT_FAULT BOOL FALSE External fault External fault
54.3 PNT_INFO BOOL FALSE Channel fault (decoded from DW 58 onward) Channel fault (decoded from DW 58 onward)
54.4 EXT_VOLTAGE BOOL FALSE Auxiliary voltage fault Auxiliary voltage fault
54.5 FLD_CNNCTR BOOL FALSE Front connector Front connector
54.6 NO_CONFIG BOOL FALSE No parameterization No parameterization
54.7 CONFIG_ERR BOOL FALSE Parameterization faulty Parameterization faulty
55.0 MDL_TYPE BYTE B#16#0 Module type Module type
56.0 SUB_MDL_ERR BOOL FALSE Interface module wrong or missing Interface module wrong or missing
56.1 COMM_FAULT BOOL FALSE Communication error Communication error
56.2 MDL_STOP BOOL FALSE RUN/STOP LED display RUN/STOP LED display
56.3 WTCH_DOG_F AULT BOOL FALSE Watchdog (FM) Watchdog (FM)
56.4 INT_PS_FLT BOOL FALSE Internal power supply fault Internal power supply fault
56.5 PRIM_BATT_FL T BOOL FALSE Battery monitoring Battery monitoring
56.6 BCKUP_BATT_ FLT BOOL FALSE Defective backup Defective backup
57.0 RACK_FLT BOOL FALSE Rack fault Rack fault
57.1 PROC_FLT BOOL FALSE CPU fault CPU fault
57.2 EPROM_FLT BOOL FALSE EPROM fault EPROM fault
57.3 RAM_FLT BOOL FALSE RAM fault RAM fault
57.4 ADU_FLT BOOL FALSE ADC fault ADC fault
57.5 FUSE_FLT BOOL FALSE Fuse Fuse
57.6 HW_INTR_FLT BOOL FALSE Process interrupt lost Process interrupt lost
58.0 CH_TYPE BYTE B#16#0 Channel type Channel type
59.0 LGTH_DIA BYTE B#16#0 Diagnostics data length per channel Diagnostics data length per channel
60.0 CH_NO BYTE B#16#0 Channel number Channel number
61.0 GRP_ERR1 BOOL FALSE Group error channel 1 Group error channel 1
61.1 GRP_ERR2 BOOL FALSE Not assigned on the FM 350-1 Not assigned on the FM 350-1
61.2 D_BIT7_2 BOOL FALSE DS1 byte 7 bit 2 DS1 byte 7 bit 2
61.3 D_BIT7_3 BOOL FALSE DS1 byte 7 bit 3 DS1 byte 7 bit 3
61.4 D_BIT7_4 BOOL FALSE DS1 byte 7 bit 4 DS1 byte 7 bit 4
61.5 D_BIT7_5 BOOL FALSE DS1 byte 7 bit 5 DS1 byte 7 bit 5
61.6 D_BIT7_6 BOOL FALSE DS1 byte 7 bit 6 DS1 byte 7 bit 6
61.7 D_BIT7_7 BOOL FALSE DS1 byte 7 bit 7 DS1 byte 7 bit 7
62.0 CH1_SIGA BOOL FALSE Channel 1, error signal A Channel 1, error signal A
62.1 CH1_SIGB BOOL FALSE Channel 1, error signal B Channel 1, error signal B
62.2 CH1_SIGZ BOOL FALSE Channel 1, error signal zero Channel 1, error signal zero
62.3 CH1_BETW BOOL FALSE Channel 1, error between channels Channel 1, error between channels
62.4 CH1_5V2 BOOL FALSE Channel 1, error in 5.2 V encoder supply Channel 1, error in 5.2 V encoder supply
62.5 D_BIT8_5 BOOL FALSE DS1 byte 8 bit 5 DS1 byte 8 bit 5
62.6 D_BIT8_6 BOOL FALSE DS1 byte 8 bit 6 DS1 byte 8 bit 6
62.7 D_BIT8_7 BOOL FALSE DS1 byte 8 bit 7 DS1 byte 8 bit 7
63.0 D_BYTE9 BYTE B#16#0 DS1 byte 9 DS1 byte 9
65.0 D_BYTE11 BYTE B#16#0 DS1 byte 11 DS1 byte 11
66.0 D_BYTE12 BYTE B#16#0 DS1 byte 12 DS1 byte 12
67.0 D_BYTE13 BYTE B#16#0 DS1 byte 13 DS1 byte 13
68.0 D_BYTE14 BYTE B#16#0 DS1 byte 14 DS1 byte 14
69.0 D_BYTE15 BYTE B#16#0 DS1 byte 15 DS1 byte 15